| Home | Wire Mesh Partitions |
|
|
 |
 |
|
Wire Mesh Partitions
As a leading supplier of wire mesh products since 1888, Major Partitions
offers you space and security with our Wire Mesh Partitions.
Built to suit your specific needs, our partitions are ideal
for major work and construction sites and useful for large
storage spaces.
Their simple and secure design has made our partitions popular
for such uses as: DEA storage enclosures, service enclosures,
tool cribs, robotic barriers, pharmaceutical cages as well
as cylindrical storage cabinets.
In addition, our Wire Mesh
Partitions offer such benefits as:
- Security, thanks to the welded wire mesh at each intersection
and the tubular design that offers more strength than
traditional wire partitions
- Simple design with controlled access to space
- Versatile and interchangeable system that can be relocated
or added to areas as needs may change
- Pre-punched components and tubular posts that can be
easily installed using ordinary hand tools and detailed
drawings provided by us
- Painted with baked grey powder coat over phosphate-treated
steel for lasting durability and protection against corrosion
Like all Major Partitions products, the Wire Mesh Partitions
are specially packaged using Steel Pallets for easy transportation
without the worry of potential damage. |
|
|
|
 |
 |
 |
|
Extra Rigidity
- 2" x 2" tubular posts every 8-0 feet
Protection against corrosion
- Powder coated finish
Added Security
- Welded wire mesh
Shipped with Highest Protection
- Special steel pallets (optional)
View Larger
|
|
|
 |
|
|
- Cylinders Locks
- Special colors
- Expanded metal
- 16g sheet metal
- Mesh openings from1"x 1" to 4" x 4"
- Wire thickness from ¼ inch to
1/8 wire
|
|
|
|
Panels
Panels shall be 10 gauge wire, spot welded into 2" x 2"
x 1/8" squares (50mm x 50mm x 3.2mm wire) welded into
an angle frame of 1-1/4" x 1-1/4" x 12 gauge angle
(32mm x 32mm x 3mm) welded at every 8 inches. Panels 5 to
6 feet long receive 1/2" (12.7mm) rod stiffener, longer
panels receive 2 rod stiffeners dividing the panelin equal
sections. All panels shall be fastened to posts by using
1/4" x 2-3/4" zinc bolts and nuts.
Swing doors
Swing doors shall be made of the same material and method
as panels with an added 1/2" rod (12.7mm) from center
to corners. Doors shall be equipped with padlock hasps (option
for cylinder lock),door strikes and 1-1/2" pair of
hinges.
Sliding doors
Sliding doors shall be made of the same material and method
as panels reinforced with 1-1/4" (32mm) square tubing.
Doors shall be supported with 2 sets of trolleys in a 2"
x 2-1/2" track x 14 gauge (50 x 62mm).Doors shall be
equipped with stoppers, trolleys, track supports, hasps and
guide (option for cylinder lock).
Posts
Posts shall be 2" x 2" x 16 gauge (50mm x 50mm
x 2mm) square tubular steel welded to a base plate 2"
x 6" x 1/4" (50mm x 150mm x 6.4mm) using two 2-3/4"
x 3/8" anchor bolts.
Finish
Baked grey powder coat over phosphate treated steel.
Types of applications
|
|
|
|