Suspended Lockers
As part of our wire mesh lockers line up, Major Partitions offers the suspended lockers which are ideal to transform unused space above parked cars into storage lockers. These lockers allow ample room over the largest of vehicles and require no additional lighting or ventilation being made of heavy duty mesh.
- Wire mesh welded at every intersection on panels and the doors providing more security
- Easy access and use with reinforced swinging door
- Pre-punched components make these lockers easy to install using ordinary hand tools
- Painted with baked grey powder coat over phosphate-treated steel for lasting durability and protection against corrosion
Materials
Panels shall be 10g wire spot welded into 2'' x 2'' squares (50mm x 50mm x 3.2mm wire) welded into an angle frame of 1 ¼'' x 1 ¼'' x 12 angle ( 32mm x 32mm x 3mm ) welded at every 8'' inches (200mm) . All panels shall be fastened to walls using 1/4'' x 1 1/4'' (6.4mm x 32mm) drive nails. All panels shall be fastened using 1/4'' x 3/4'' (6.4mmx 19mm) zinc bolts and nuts
Swing doorsSwing doors shall be made of the same material and method as panels with an added ½'' rod ( 12.5mm) form center to corners . Doors shall be equipped with padlock lugs, door strikes and 1 1/2 pair of hinges TopsFormed 16gauge sheet metal
Same construction as panels
BottomsPanels shall be 10g wire spot welded into 2'' x 2'' x 3/16'' squares (50mm x 50mm x 4.8mm wire) welded into an angle frame of 1 ¼ x 1 ¼ x 12 angle ( 32mm x 32mm x 3mm ) welded at every 8 inches (200mm) . Panels receive 2 stiffeners rods of 1/2'' (12.5mm) dividing the panel in equal sections.
FinishBaked grey powder over a phosphate treated steel
