Double Tier Lockers
As part of our wire mesh lockers line up, Major Partitions offers the double tier locker which is ideal for areas with limited space. Allowing for a greater amount of lockers to be installed on any given location.
- Wire mesh welded at each intersection for stronger cut-outs and no fabric tears
- Options such as triple tier lockers or sheet metal, for different types of storage
- Pre-punched components make these lockers easy to install using ordinary hand tools
- Painted with baked grey powder coat over phosphate-treated steel for lasting durability and protection against corrosion
- Made from mesh that is solidly welded into an angle frame - not simply wire mesh with brackets
Materials
Shall be 10g wire spot welded into 2'' x 2'' squares (50mm x 50mm x 3.2mm wire) welded into an angle frame of 1 ¼'' x 1 ¼'' x 12 angle ( 32mm x 32mm x 3mm ) welded at every 8'' inches (200mm) . All panels shall be fastened to floor and walls using 1/4'' x 1 1/4'' (6.4mm x 32mm) drive nails. All panels shall be fastened using 1/4'' x 3/4'' (6.4mmx 19mm) zinc bolts and nuts
Swing doors shall be made of the same material and method as panels with an added ½'' rod ( 12.5mm) form center to corners . Doors shall be equipped with padlock lugs, door strikes and 1 1/2 pair of hinges
CeilingsShall be 2''x 4''x 1/8'' rectangles (50mm x 100mm) wire framed with 1 1/4''x 1 1/4'' x 12g angle (32mm x 32mm x 3mm ) angle on perimeters and secured with wire loop toes ( option framed tops available)
Baked grey powder over a phosphate treated steel
ShelvesShall be constructed of 22g galvanized steel. Option of 2'' x 2'' squares (50mm x 50mm x 3.2mm ) wire
