| Home
| Army Lockers (TA-50) |
|
|
 |
 |
 |
Army Locker - TA-50 Wire Mesh Lockers
Built to meet the same high quality standards as all Major
Partitions’ products, our TA-50 army lockers offer
secure military storage alternatives. These gear lockers
can be customized for any large area and are ideal for storing
all types of military equipment – from duffle bags
and personal items to larger, heavier military gear.
Some of the advantages
our TA Lockers offer include:
- Strong enough to hold heavy duty military and government
agency equipment
- Lock options to ensure secure storage
- Stored equipment is organized and easily accessible,
thanks to shelving and layout options
- Wire mesh welded at each intersection provides additional
security
- Painted with baked grey powder coat over phosphate
treated steel for lasting durability and protection
against corrosion
TA-50 lockers are army lockers that are built to last and
to endure some of the toughest conditions, TA-50 Lockers
are the choice of various military and government agencies
when it comes to secure, controlled storage gear cages.
|
|
 |
 |
 |
 |
 |
 |
Extra Rigidity
- 2" x 2" tubular posts every 8-0 feet
Protection against corrosion
- Powder coated finish
Added Security
- Welded wire mesh
More Rigidity and Security
- Made from mesh that is solidly welded into
an angle frame, not simply wire mesh with
brackets
Shipped with Highest Protection
- Special steel pallets (optional)
View Larger
|
 |
 |
 |
 |
 |
- Cylinders Locks
- Special colors
- Expanded metal
- 16g sheet metal
- Mesh openings from 1"x 1" to 4" x
4"
- Wire thickness from ¼ inch to
1/8 wire
|
|
 |
Panels
Panels shall be 10 gauge wire, spot welded into 2" x
2" x 1/8" squares (50mm x 50mm x 3.2mm wire) welded
into an angle frame of 1-1/4" x 1-1/4" x 12 gauge
angle (32mm x 32mm x 3mm) welded at every 8 inches. All
panels shall be fastened to posts by using 1/4" x 2-3/4"
zinc bolts and nuts.
Swing doors
Swing doors shall be made of the same material and method
as panels with an added 1/2" rod (12.7mm) from center
to corners. Doors shall be equipped with padlock hasps (option
for cylinder lock),door strikes and 1-1/2" pair of
hinges.
Posts
Posts shall be 2" x 2" x 16 gauge (50mm x 50mm
x 2mm) square tubular steel welded to a base plate 2"
x 6" x 1/4" (50mm x 150mm x 6.4mm) using two 2-3/4"
x 3/8" anchor bolts.
Finish
Baked grey powder coat over phosphate treated steel.
|
|
 |
|